This stereo power amplifier is a result of significant improvement in our very successful 270W model. Applied solutions, new design and higher quality parts led to further raising of quality of sound and better control on all frequencies, and especially in bass area.
| Technical specifications: | |
|---|---|
| 8 ultra fast Sanken RET output power devices per channel, with a total current capability of 160 Amperes. | |
| 8 stages of voltage regulation. | |
| Current feedback topology, with no overall feedback and with only 0.03% Intermediation distortion (IMD) at rated power output into 8 Ohms. | |
| Current feedback topology, with no overall feedback and with only 0.02% Intermodulation distortion (IMD) at rated power output into 8 Ohms | |
| Each channel uses a 1.000 VA low noise toroidal transformer and 132.000 µF of total capacitance. | |
| Frequency response | DC-300kHz +0, -3 dB |
| S/N ratio | better than -112 dB at rated output into 8 Ohms |
| Damping factor | better than 6,000:1 into 8 Ohms, 20Hz…20kHz |
| Pink noise power output of 420W/660W/1.200W into 8/4/2 Ohms | |
| Input sensitivity | 2V |
| Dimensions | 500x240x480 mm (19.7″x8.7″x26″) WxHxD |
| Dimensions in box | 500x240x600 mm (19.7″ x 9.45″ x 24,8″) WxHxD |
| Dimensions in box | 640x360x570 mm WxHxD |
| Net weight | 52 kg |
| Btto weight | 64 kg |